Car Recall Check

The windscreen may not have been correctly bonded. As a result, water ingress might occur and there may be increased wind noise. In extreme cases where there is an insufficient chemical bond between the windscreen glass and the PU adhesive, full windscreen retention may not be achieved in the event of air bag deployment or during a vehicle crash.

The routing of the electrical harness within the steering column assembly has insufficient clearance to the metalwork of the steering column, causing the harness to be damaged or pulled out of the connector when the steering column is adjusted.This can result in impaired steering functionality and failure of the horn and the direction indicators, increasing the risk of an accident.

The Exhaust Gas Recirculation (EGR) crossover pipe may not have been manufactured according to the specification and can crack, allowing the escape of high temperature exhaust gas.Consequently, the escaped gas can come into contact with the plastic Variable Camshaft Timing cap and melt it, allowing liquid oil to be exposed to hot exhaust gas, increasing the risk of fire.

Improperly tightened diesel particulate filter mounting frame fittings may lead to loosening or detachment of the fittings, which will cause stress to the exhaust joints and, over time, increase the possibility of unmeasured exhaust gas leaks. In the event of an exhaust leak, hot exhaust gases can leak under the vehicle or under the engine compartment, which can damage engine components increasing the risk of a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The front collision sensors may not have been fitted correctly. This can cause the safety belt restraint system to malfunction, leading to serious injuries to the occupants. In the event of an accidental deployment of the front airbag, control of the vehicle may be lost, creating a risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The coolant pump may malfunction and stop the coolant flow, causing the engine to overheat quickly and subsequently break an engine-mounted plastic elbow in the cooling circuit. Coolant can leak onto the turbocharger's heat shield, creating a risk of fire in the engine compartment. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The left seat frame in the second seat row may not be properly secured, causing it to move forward and upward in the event of a collision or sudden braking. This increases the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The engines may become blocked, which can cause external oil leakage or oil transfer into the air intake system, creating a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The headlamp assemblies could fail when the vehicle is started or switched off and will not recover on any subsequent ignition cycles. This results in the failure of functioning of the headlamp, front position lamp, daytime running light and turn signal indicator, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The tail lamp connecting cable may be damaged and cause the tail lamp to fail. As a result, other road users may not be aware of braking, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.